TECTIQ Reset Card

Reset wirelessly integrated door components to factory settings? If necessary, present the reset card - and the fitting, cylinder or wall reader is back to the factory settings.

Description





With the digital TECTIQ locking system.



Reset settings

Do you want to reset one or more door components (fitting, cylinder, wall reader) of the TECTIQ system to the factory settings? With the TECTIQ reset card: After writing on the desktop reader (see installation instructions), the card is held against the door component or wall reader - thus resetting the firmware to the factory settings.



Important warning

During a reset, all parameterisations, settings and protocols on the component that were made after commissioning are lost. A factory reset is therefore only recommended for experienced administrators who maintain the TECTIQ system themselves. In all other cases, a reset by the installation company responsible for maintenance is recommended.



The RFID chip card with passive transponder (MIFARE® DESFire®) does not require a battery.

Product advantages

  • System card for resetting TECTIQ access components (fittings, cylinders, wall readers) to the factory settings
  • A reset access component can thus be reused in this system.
  • Creating or programming the reset card on the TECTIQ desktop reader
  • MIFARE® DESFire® card structure enables convenient, secure, contactless and readout-protected data transmission
  • Smart card in cheque card format for wallet, card holder, etc.
  • Consecutively numbered

Downloads

General downloads:

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging
Specifications
Area of application: to reset the door products in a TECTIQ system
Colour: Yellow
Design: Card
Dimensions: 86 x 54 x 1 mm
Item abbreviation: TEC-ST-Reset
Material: plastic
Max. operating temperature: 50 °C
Min. operating temperature: -20 °C
Programming technology: RFID (13,56 MHz)
RFID conformity: ISO 14443
RFID frequency: 13,56 MHz
RFID technology: MIFARE® DESFire® EV1, EV2, EV3
Security features: Copy and read protection through MIFARE® DESFire® + ABUS security application, cards are assigned to the customer's TECTIQ system
Transponder conformity: Passive transponder ISO 14443 A (MIFARE® DESFire®)
Transponder encryption: AES 128-Bit
Transponder programming: TECTIQ Access Manager via TECTIQ Card Reader
Loading ...