Reducing sleeve

Your door handle wobbles? The new hardware doesn’t fit the existing front door lock? Then the ABUS reducing sleeve is the answer to your problem.

All variants for Reducing sleeve

Description

Reducing sleeve LITTLE HELPER FOR YOUR NEW DOOR HANDLE

If you want to install a new handle on the room door, you need a change pin or square bolt.

But sometimes the lock nut and the square bolt don’t fit together: A few millimetres separate the parts - the closing mechanism doesn’t work or the door handle wobbles. The ABUS reducing sleeve can help in this case.

By sliding the helpful metal part onto the pin, you simply compensate for the missing millimetres. Since the ABUS reducing sleeve is designed to be extra long (30 mm instead of the more typical only 15 mm), this can be done very easily and without any annoying readjustment. You can also choose between three variants: For example, the ABUS reducing sleeve can reduce the size of the lock nut from 9 to 8 mm, from 10 to 8 mm or from 10 to 9 mm. Here's a quick introduction: While the lock nut is 10 mm for front doors, it is 8 mm for common flat doors and 9 mm for fire doors.

Technologies

Metal reducing sleeves
extra long, 30 mm

Operation and use

Serves as compensation between square bolt / change pin

Variants

Available in 9 mm to 8 mm, 10 mm to 8 mm and 10 mm to 9 mm

Downloads

General downloads:

Data sheet

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Specifications

colour:	silver

Weight:	14 g