VdS B Door locking element with counterpart and opening detector

Well protected, inevitably false alarm-proof: The motorised locking element with opening detector prevents entry into an armed area and triggers the intruder alarm when the door is broken open.

Description

AZSE10100 SECURE ACCESS WITHOUT FALSE ALARMS WITH INTRUDER ALARM.

Rule out alarms due to incorrect operation
No authorised user should unintentionally enter an area in the building that is monitored by an armed intruder alarm system. This is effectively prevented if all doors to the security area are equipped with the motorised locking element including its counterpart. This means that the door can only be opened after the system has been disarmed.

Inevitably user-friendly & secure
The motorised lock is activated and deactivated by the electronic control via the intruder alarm system. If the IAS or wired alarm system is armed, the door is locked. If the alarm system is disarmed, the door is unlocked. Thus, with the VdS C certified locking element, the intruder alarm system forces the user to take action before entering.

Fits in doors made of metal, plastic, wood and glass
The locking element is suitable for installation in plastic, wooden and metal door frames. With the surface-mounted housing available, the locking element can also be used with glass doors without any problems.

Reports forced entry
The locking element knows its status (open, closed) via lock monitoring and reports forced opening of the door to the alarm control panel.

Awards & Partners

Product advantages

With the locking element, the door can only be opened after the system has been disarmed
Prevents unintentional entry into an armed area (forced action)
Functions as an opening detector and reports the forced opening of the door (through tampering/vandalism of the locking element)
Electronic control of motorised locking by wiring to the intruder alarm control panel
Reports an intruder alarm by separate wiring with the intruder alarm control panel
Provides feedback on the switching status (door locked or open)
For installation in plastic, wooden and metal door frames; surface-mounted housing also available for glass doors
VdS certified: VdS class C (G 196089), door contact: VdS Class B (G 197541)
Suitable for intruder alarm systems under DIN EN 50131

Downloads

General downloads:

Data sheet

Certificates:

VdS C certificate

Recycling

We have summarised for you which disposal information is important in your country.

Disposal & labelling of packaging

Locking element with counterpart and door contact

Specifications

Area of application:	Doors
Cable length:	4 m
Certifications:	VdS B
Compatible with:	Secoris, Terxon, Secvest
Connection cable length:	350 cm
DC voltage supply:	7 - 15 V
Depth:	28 mm
Dimensions:	stainless steel faceplate: 175 x 20 x 2 / Housing: 135 x 17 x 28 mm
Environmental class:	III
Height:	135 mm

IP protection class:	43
Max. operating temperature:	60 °C
Min. operating temperature:	-25 °C
PSTI conformity required:	No
Power consumption:	35 mA
Standby power consumption:	1,2 mA
Type of detection:	magnetic field
VdS class:	B
Width:	19 mm